authorised distributor
Steel Guard nanocato™ is ready to use eco-Friendly (RoHS) & user-friendly unique water based "Rust Preventive" as well as pretreatment chemical for all types of Construction steel & Industrial M.S. applications. We are credited for many first & are part of our innovation.
 |
Poor paint adhesion without application of Steel Guard Nanocoat. |  |
5B type paint adhesion after application of Steel Guard Nanocoat. |
 |
Steel Guard Coated followed by single coate of Epoxy-paint after 1200 Hours in Salt Spray machine as per ASTMB-117. |  |
Photo of cross cut test Epoxy Paint & Salt Spray after 120 hours without STEEL GUARD. |
Advantages:
- Rush proof
- Extra Bonding Strength 100%
- Inorganic Material
- Eco-Friendly
- Most Economical
- Good Shelf Life
- Paint/Spray/Dip Application
- No Repeat Application Needed
- Stable 400°C to
- From -200°C(Neglegible)
- Film Thickness 0 to 0.2 Microns
- No Effect on plastics
- Job can be painted, Powder Coated
- No need of Primers & Red Oxide
- Non electric static
- 1Ltr to 200Ltrs Pkg.
- Coverage 200 Sqr.ft. per Ltrs.
Product Features:
- First & only of its kind in India
- 100% rust free with simple use
- 100%-300% extra Bonding Strength for construction steel with Cement Concrete
- 200% Extra Bonding with Paint
- Added gloss of paint & Primer
- Reduction in RA Value
- "Peeling off" of paint is stopped Completely
- 5B-4B type adhesive of paint with coated M.S. Surface
- Steel Guard Nanocoat™ acts at Molecular Level, hence doesn't form any extra layer on the surface of the steel
- The nanofilm' on the surface adds extra richness in the finishing of the steel
- Tested under-196° to -300° Temperature & found no Scaling or Blistering or change in the form or degradatin of the Steel Guard Nanocoat™
- Tested for : Scratch, Bending Elongation, Impact, Heating
- Freezing & Pull-out (Bonding) Steel Guard Nanocoat™ is Non-toxic, Non-evaportive & Non-inflammble etc. R.O.H.S. approved.
- Repeated use of liquid is possible during dipping.
- Steel Guard nanocoat™ can be used by Brush/Spray/Dip methods & clean surface properly Before use.
- Use Hand Gloves & Goggles.